吸氣式實力輸送門徑是氣力保送行業最為思空見貫的，物料的輸送凡是在風機的吸氣管道一側進行。當風機開動后，在風機的吸氣管道內造成一定的負壓。這時，在管道外貌的空氣，就被大氣不時地壓入管道。與此同時，物料也被氣氛發起顛末吸嘴進入管道，并被輸送至卸料器。在卸料器中，物料與氣氛羈糜，然后從卸料器底部的關風器4架空。氣氛則經除塵器與感染落伍入風機，從此排人大氣?；蛟俳?jīng)一道除塵器二次沾染后再排人大氣。

The diameter of the suction type power conveying door is the most widely used in the pneumatic conveying industry, and material conveying is usually carried out on the suction pipe side of the fan. After the fan is started, a certain negative pressure is created in the suction duct of the fan. At this point, the air on the surface of the pipeline is occasionally pushed into the pipeline by the atmosphere. At the same time, the material is also initiated by the atmosphere and enters the pipeline through a suction nozzle, and is transported to the unloader. In the unloader, the material and atmosphere are mixed, and then suspended from the bottom of the unloader by the air damper 4. The atmosphere is then filtered through the dust collector and filtered into the fan, and is then released into the atmosphere. Or it can be further contaminated by a dust collector before being released into the atmosphere.

這種輸送門徑的共性是：

The commonality of this type of conveying gate diameter is:

1、大要從幾處同時吸取物料，輸送到一處解散。

1. It is necessary to simultaneously extract materials from several locations and transport them to one location for dissolution.

2、適宜于聚積面廣，或裝在低處深處物料的輸送。

2. Suitable for conveying materials with a wide accumulation surface or installed in low and deep places.

3、只有有空氣吸入口，就可以或許很簡單地把管道伸入到一些狹隘的處所，吸取物料發展保送。

3. Only with an air intake can the pipeline be easily extended into narrow areas to extract materials for development and transportation.

4、在保送歷程中，沒有塵埃高漲，供料口也許批開，供料和輸送大概一連進行。

4. During the delivery process, there is no dust rising, and the feeding port may be opened in batches. The feeding and conveying process is roughly continuous.

5、由于運送氣流的壓力低于大氣壓力，水分容易揮發，所以對水份多的物料比壓氣式簡單輸送。

5. Due to the lower pressure of the conveying airflow compared to atmospheric pressure, moisture is easily evaporated, making it easier to transport materials with high moisture content than pneumatic conveying.

本文由氣力輸送系統友情奉獻.更多有關的知識請點擊:http://wap.mengjianfilm.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會(huì )陸續向大家奉獻.敬請期待.

This article is a friendly contribution from the pneumatic conveying system For more information, please click: http://wap.mengjianfilm.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.